PorexRx logo
 
equipment01 equipment02 equipment03


 
 
 
       
         
 
OVERVIEW
 
Situated in Vazzola, Cadalpe S.P.A prides itself on continued growth and innovation and aims to make its own contribution to the evolution of the sector in which it operates. Experience and a love of technology, applied to vinification make Cadalpe one of the most important companies in the sector.

Crossflow unit: C41 Tangential flow micro-filtering systems. The capillary polymeric membranes and controlled porosity hollow fibres are the heart of this system.

A high tech solution, offering modern advantages.
 
 
A WELL KNOWN NUMEROUS FAMILY  
 
The C26 single cavity rotary vacuum filter for cyclical processing, with filter aiding pre-coat is ideal for filtering products with high percentages of suspended solids. It is especially effective in the wine-making sector for filtering grape must in its natural state or after enzymatic treatment and the recovery of the liquid fraction of the dregs from decanting, centrifugal processing and first racking.
       
Its main distinguishing features are:
     
 
A cutting angle that reduces unused filter surface to a minimum, due to the innovative positioning of the cutting blade.
     
Savety system to protect the operator from contact with the cutting blade at all stages of the filtering operation.
     
The drum is in full vacuum to ensure uniform use of the filter surface and delicate aeration of he must.
         
Re-constitution of the pre-coat if it becomes clogged due to bad handling or inadequate metering.
     
Special type of pump dedicated to the specific filtering stages.
 
   
Self-regulating impeller to maintain uniform pulp thickness.
   
   
Special hydrodynamic system to make up the pre-coat.
   
   
Pre-coat support surface for efficient drainage.
   
   
Water economizer for the vacuum pump.
   
   
Total residue filtering device.
   
   
   
ONE OF THE BEST MACHINES ON THE MARKET
 
   
The almost total elimination of the negative angle is the most important innovation, which provides various advantages, such as substantial reduction of the volume of suction air, increase of the drying surface, and consequent higher output.

Besides its construction entirely in prime quality stainless steel, the filer incorporates a hydrodynamic system to keep the pre-coat suspension homogeneous, thereby limiting the interspace between the tank and drum.

Pulp is input by means of an electric reversible positive-displacement pump, and filered fluid is drawn off by means of a submersed electric pump Pulp deposit on the drum surface is regulated by an impeller.

Thermostatic control ensures low water consumption for the vacuum pump liquid ring.
 
         

 
 
contact
 
Tel
  +27 (0)21 862 0232
Fax
  +27 (0)86 578 4214/2
E-mail
Aftersales
Eaton
willmeslogosmall
cadalpelogosmall
PorexBiochem
 
Copyright © Porex SA • Website developed by Dynamic Designs